Corolla L4-1.8L (2ZZ-GE) (2005)
/Page-343006.png)
29. REMOVE TRANSVERSE ENGINE ENGINE MOUNTING BRACKET
a. Remove the 4 bolts and engine mounting bracket.
30. REMOVE CRANKSHAFT POSITION SENSOR
31. SET NO.1 CYLINDER TO TDC/COMPRESSION
a. Turn the crankshaft pulley until its groove and the timing mark "0" of the timing chain cover are aligned.
b. Check that the point marks of the camshaft timing sprocket and the VVT timing sprocket are as shown in the illustration.
HINT: If not, turn the crankshaft 1 revolution to align the marks as above.
32. REMOVE CRANKSHAFT PULLEY
a. Using SST, remove the pulley bolt.
SST 09213-70011 (09213-70020), 09330-00021
