Corolla L4-1.8L (2ZZ-GE) (2005)
/Page-619002.png)
a. Disconnect the mass air flow meter connector.
b. Disconnect the 2 VSV connectors.
c. Remove the 2 wire harness clamps.
d. Disconnect the fuel vapor feed hose No. 1 from the VSV.
e. Disconnect the fuel vapor feed hose No. 3 from the VSV.
f.
Disconnect the 3 vacuum hoses.
g. Loosen the air cleaner hose clamp bolt.
h. Unlock the 2 clamp hooks.
i.
Remove the air cleaner cap together with the air cleaner hose.
6. REMOVE THROTTLE BODY ASSY
a. Disconnect the throttle position sensor connector.
b. Disconnect the ISC valve connector.
c. Disconnect the ventilation hose.
d. Disconnect the water by- pass hose No. 3.
e. Disconnect the water by- pass hose No. 2.
