Corolla L4-1.8L (2ZZ-GE) (2005)
/Page-619003.png)
f.
Remove the 2 bolts and 2 nuts, then remove the accelerator control cable bracket and throttle body.
g. Remove the gasket from the intake manifold.
7. REMOVE E.F.I. THROTTLE POSITION SENSOR
a. Remove the 2 screws, then remove the throttle position sensor.
8. REMOVE THROTTLE BODY IDLE AIR CONTROL VALVE ASSY
a. Remove the 3 screws, then remove the throttle body idle air control valve assy.
b. Remove the gasket from the throttle body.
9. INSTALL THROTTLE BODY IDLE AIR CONTROL VALVE ASSY
a. Install a new gasket onto the throttle body.
b. Install the throttle body idle air control valve assy with the 3 screws.
