Corolla L4-1.8L (2ZZ-GE) (2005)
NOTICE: Be careful not to drop the inboard joint.
25. REMOVE DRIVE SHAFT BEARING CASE SUB-ASSY SNAP RING (RH DRIVE SHAFT)
a. Using a screwdriver, remove the drive shaft bearing snap ring.
26. REMOVE DRIVE SHAFT BEARING CASE SUB-ASSY (RH DRIVE SHAFT)
a. Using a press, remove the bearing case sub-assy.
NOTICE: Be careful not to drop the inboard joint.
b. Remove the straight pin.
27. REMOVE FRONT DRIVE SHAFT DUST COVER (RH DRIVE SHAFT)
a. Using SST and a press, remove the dust cover.
SST 09950-00020
NOTICE: Be careful not to drop the inboard joint.
28. REMOVE FRONT DRIVE SHAFT BEARING (RH DRIVE SHAFT)
a. Using a snap ring expander, remove the inner RH shaft snap ring.