Corolla L4-1.8L (2ZZ-GE) (2005)
b. Using SST and a press, remove the drive shaft bearing.
SST 09527-21011
NOTICE: Be careful not to drop the inboard joint.
c. Remove the drive shaft bearing snap ring.
29. INSTALL FRONT DRIVE SHAFT BEARING (RH DRIVE SHAFT)
a. Using SST and a press, install a new drive shaft bearing.
SST 09950-60010 (09951-00650), 09950-70010 (09951-07100)
30. INSTALL DRIVE SHAFT BEARING CASE SUB-ASSY SNAP RING (RH DRIVE SHAFT)
a. Using a screwdriver, install a new drive shaft bearing snap ring.
31. INSTALL DRIVE SHAFT BEARING CASE SUB-ASSY (RH DRIVE SHAFT)
a. Using SST and a press, install the bearing case sub-assy to the inboard joint.
SST 09527-10011, 09710-04081