Corolla L4-1.8L (2ZZ-GE) (2005)
b. Using a snap ring expander, install a new inner RH shaft snap ring.
c. Install the straight pin.
32. INSTALL FRONT DRIVE SHAFT DUST COVER (RH DRIVE SHAFT)
a. Using SST and a press, install a new dust cover until the distance (A) from the tip of the bearing case sub-assy to the dust cover reaches the
specification, as shown in the illustration.
SST 09726-40010, 09527-10011
Distance (A): 1.0 mm (0.039 inch)
NOTICE:
^
Dust cover should be installed completely.
^
Be careful not to damage the dust cover.
33. INSTALL FRONT DRIVE SHAFT DUST COVER RH
a. Using SST and a press, install a new dust cover RH until the distance (A) from the tip of center drive shaft to the dust cover RH reaches the
specification, as shown in the illustration.
SST 09527-10011
Distance (A): 86.0 to 87.0 mm (3.386 to 3.425 inch)
NOTICE:
^
Dust cover should be installed completely.
^
Be careful not to damage the dust cover.