Corolla LE Sedan L4-1.8L (1ZZ-FE) (1999)
/Page-1169006.png)
c. Secure the clamp onto the boot.
d. Place SST onto the clamp.
SST 09521-24010
e. Tighten the SST so that the clamp is pinched.
NOTICE: Do not overtighten the SST.
f.
Using SST, adjust the clearance of the clamp.
SST 09240-00020
Clearance: 1.9 mm (0.075 inch) or less
11. CHECK DRIVE SHAFT
