Corolla LE Sedan L4-1762cc 1.8L DOHC MFI (1998)
3. Tie the tires together with 2 wire harness.
CAUTION: Make sure that the wire harness is tight. It is very dangerous when loose wire harness results in the tires coming free due to the shock
from the airbag deploying.
HINT: Place the SST connector and wire harness inside tires. Secure at least 1 m (3 ft) of slack for the wire harness.
f.
Deploy the airbag.
1. Connect the SST red clip to the battery positive (+) terminal and the black clip to the battery negative (-) terminal.
2. Check that no one is within 10 m (33 ft) area around the tire which the side airbag assembly is tied to.
3. Press the SST activation switch and deploy the airbag.
HINT: The airbag deploys simultaneously as the LED of the SST activation switch lights up.
g. Dispose of side airbag assembly.
CAUTION:
^
The side airbag assembly is very hot when the airbag is deployed, so leave it alone for at least 30 minutes after deployment.
^
Use gloves and safety glasses when handling a side airbag assembly with the deployed airbag.
^
Do not apply water etc. to a side airbag assembly with the deployed airbag.
^
Always wash your hands with water after completing the operation.
1. Remove the side airbag assembly from the tire.
2. Place the side airbag assembly in a vinyl bag, tie the end tightly and dispose of it in the same way as other general parts disposal.
