Corolla LE Sedan L4-1762cc 1.8L DOHC MFI (1998)
1. Install steering wheel.
a. Align the matchmarks on the steering wheel and main shaft assembly.
b. Torque the steering wheel set nut.
Torque: 34 Nm (25 ft. lbs.)
c. Connect the connector.
2. Install steering wheel pad.
NOTICE: Make sure the wheel pad is installed with the specified torque. If the wheel pad has been dropped, or if there are cracks, dents or other
defects on the case or connector, replace the wheel pad with a new one. When installing the wheel pad, take care that the wirings do not interfere
with other parts and that they are not pinched between other parts.
a. Connect the airbag connector.
b. Install the wheel pad after confirming that the circumference groove of the torx screws are caught on the screw case.
c. Using a torx socket wrench, torque the 2 screws.
Torque: 8.8 Nm (78 inch lbs.)
d. Install the 2 steering wheel lower No 2 covers.
3. Check steering wheel center point.
