toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Control Assembly, HVAC|Removal and Installation|Page 3594 > < Control Assembly, HVAC|Removal and Installation
Page 2
background image

7. REMOVE LOWER PANEL
8. REMOVE REAR CONSOLE BOX
9. REMOVE SHIFTING HOLE BEZEL

10. REMOVE FINISH LOWER CENTER PANEL

11. DISCONNECT HEATER CONTROL CABLE

12. REMOVE A/C CONTROL ASSEMBLY

Remove the 2 screws and pull out the A/C control assembly, then disconnect the connector.

NOTE:  Be careful not to vent the mode control cable, when pull out the A/C control assembly.

INSTALLATION

1. INSTALL A/C CONTROL ASSEMBLY

a. Connect the connector.

Control Assembly, HVAC|Removal and Installation|Page 3594 > < Control Assembly, HVAC|Removal and Installation