Corolla S Sedan L4-1.8L (1ZZ-FE) (2002)
b. Pass the heater control cables as shown in the illustration.
c. Install the 2 set screws.
2. CONNECT HEATER CONTROL CABLES
a. Set Temperature control dial at "MAX. COOL" position
b. Set Mode control dial at "DEF" position
c. Adjust air mix control cable.
Set air mix damper control lever to "MAX. COOL" position and connect the inner cable to lever pin and clamp the outer cable.
HINT: Lock the clamp while lightly pulling the outer cable to the direction shown by arrow in the illustration.