toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Headliner|Specifications|Page 4485 > < Headliner|Specifications|Page 4483
Page 1
background image

Headliner: Service and Repair

REMOVAL 

1. REMOVE REAR SEAT
2. REMOVE INNER REAR VIEW MIRROR
3. REMOVE FRONT DOOR SCUFF PLATES
4. REMOVE COWL SIDE TRIMS
5. REMOVE CENTER PILLAR LOWER GARNISHES
6. REMOVE REAR DOOR SCUFF PLATES
7. REMOVE FRONT DOOR OPENING TRIMS
8. REMOVE REAR DOOR OPENING TRIMS
9. REMOVE FRONT PILLAR GARNISH

a. Pry out clips by your hand.
b. Pull the garnish upward to remove it.
c. Employ the same manner described above to the other side.

10. REMOVE CENTER PILLAR UPPER GARNISH

a. Remove the front seat outer belt shoulder anchor.

Torque:  41 N.m (420 kgf.cm, 30 ft.lbf) 

b. Remove the center pillar upper garnish.
c. Employ the same manner described above to the other side.

11. w/ High-mounted stop light:

REMOVE HIGH-MOUNTED STOP LIGHT

Headliner|Specifications|Page 4485 > < Headliner|Specifications|Page 4483