toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Headliner|Specifications|Page 4486 > < Headliner|Specifications|Page 4484
Page 2
background image

a. Push on the both sides of the cover to release the claws by your hand and remove the cover as shown in the illustration.
b. Remove the stop light, then disconnect the connector.

12. REMOVE ROOF SIDE INNER GARNISH

a. Using a screwdriver, pry loose and remove the garnish.

HINT:  Tape the screwdriver tip before use.

b. Employ the same manner described above to the other side.

13. REMOVE TETHER ANCHOR

a. Using a screwdriver, remove the CRS tether anchor cover.

HINT:  Tape the screwdriver tip before use.

b. Remove the tether anchor by loosening the bolt.
c. Employ the same manner described above to the other sides.

14. REMOVE PACKAGE TRAY TRIM
15. REMOVE ROOM LIGHT

a. Using a screwdriver, remove the room light cover.

HINT:  Tape the screwdriver tip before use.

b. Remove the 3 screws, then disconnect the connector.

16. w/ Sliding roof:

REMOVE MAP LIGHT ASSEMBLY

17. w/ Sliding roof:

REMOVE SLIDING ROOF OPENING TRIM

18. REMOVE SUN VISORS AND HOLDERS
19. REMOVE ASSIST GRIPS
20. REMOVE ROOF HEADLINING

Headliner|Specifications|Page 4486 > < Headliner|Specifications|Page 4484