Corolla S Sedan L4-1794cc 1.8L DOHC MFI (2001)
a. Using a screwdriver, remove the 4 teflon rings from the control valve assembly.
NOTICE: Be careful not to damage the grooves for the teflon ring.
b. Expand 4 new teflon rings with your fingers.
NOTICE: Be careful not to overexpand the teflon ring.
c. Coat the teflon rings with power steering fluid.
d. Install the teflon rings to the control valve assembly, and settle them down with your fingers.
e. Carefully slide the tapered end of SST over the teflon rings until them fit to the control valve assembly.
SST 09631-20081
NOTICE: Be careful not to damage the teflon rings.
REASSEMBLY
NOTICE: When using a vise, do not overtighten it.
1. COAT PARTS INDICATED BY ARROWS WITH POWER STEERING FLUID OR MOLYBDENUM DISULFIDE LITHIUM BASE
GREASE. Refer to Steering; Service Precautions.
See: Service Precautions
2. INSTALL OIL SEAL
a. Coat a new oil seal lip with power steering fluid.
b. Using SST, press in the oil seal.
SST 09950-60010 (09951-00240, 09951-00400, 09952-06010), 09950-70010 (09951-07360)
NOTICE:
-
Make sure to install the oil seal facing in the correct direction.
-
Take care that the oil seal does not get reversed as you install it.