Corolla S Sedan L4-1794cc 1.8L DOHC MFI (2001)
3. INSTALL STEERING RACK
a. Install SST to the steering rack.
SST 09631-16020
HINT: If necessary, scrape the burrs off the steering rack teeth end and burnish.
b. Coat SST with power steering fluid.
c. Install the rack into the rack housing.
d. Remove the SST.
4. INSTALL BUSHING
a. Coat a new O-ring with power steering fluid and install it to the bushing.
b. To prevent oil seal lip damage, wind vinyl tape on the steering rack end, and apply power steering fluid.
c. Install the bushing into the rack housing.
NOTICE:
-
Make sure to install the bushing facing in the correct direction.
-
Be careful not to damage the oil seal lip.
5. INSTALL CYLINDER END STOPPER
a. Align the installation hole for the wire of the cylinder end stopper with the slot of the rack housing. Install a new wire into the cylinder end
stopper. Using SST, turn the cylinder end stopper clockwise 450 ± 50°.
SST 09631-10021