Corolla Sedan L4-96.8 1587cc 1.6L DOHC (4A-FE) (1989)
/Page-840003.png)
Inspect parking brake lining and disc for proper contact
If the contact between the brake lining and disc is improper, repair the 1lining with a brake shoe grinder, or replace the brake shoe assembly.
Measure clearance between parking brake shoe and lever using a feeler gauge.
Standard clearance: Less than 0.35 mm (0.0138 in)
If the clearance is not within specification, replace the shim with one of the correct size.
INSTALLATION
Remove the parking brake lever, and install the correct size shim.
Install the parking brake lever with a new C-washer.
Remeasure the clearance.