Corolla Sedan 4-Door L4-1587cc 1.6L DOHC MFI (1997)
e. Using SST 09350-32014 (09351-32111, 09351-32130) or equivalents, and a hammer, drive in a new oil seal.
Drive in depth: 2.4 +/- 0.3 mm (0.094 +/- 0.012 inch).
f.
Coat the lip of the oil seal with Multi-Purpose (MP) grease.
7. Transaxle Case Side:
If necessary, replace oil seal and side bearing outer race, as follows:
a. Using a screwdriver and hammer, drive out the oil seal.
b. Using SST 09612-65014 or equivalent, pull out the outer race and shim.
c. Place the shim into the case.
d. Using SST 09950-60020 (09951-00680), 09950-70010 (09951-07150) or equivalents, and a hammer, drive in a new outer race.
e. Using SST 09350-32014 (09351-32130, 09351-32150) or equivalents, and a hammer, drive in a new oil seal.
Drive in depth: 2.4 +/- 0.3 mm (0.094 +/- 0.012 inch).
f.
Coat the lip of the oil seal with MP grease.
ASSEMBLY
1. Assemble differential case, as follows: