Corolla Wagon L4-107.5 1762cc 1.8L DOHC (7A-FE) (1993)
4. INSTAL THRUST WASHER
a. Coat the thrust washer with petroleum jelly.
b. Align the tab of the washer with the hollow of the pump body.
5. INSTALL OIL SEAL RINGS
Install the two oil seal rings to the stator shaft back side.
NOTE: Do not spread the ring ends more than necessary.
HINT: After installing the oil seal rings, check that they move smoothly.
6. CHECK PUMP DRIVE GEAR ROTATION
Turn the drive gear with two screwdrivers and make sure it rotates smoothly.
NOTE: Be careful not to damage the oil seal lip.