Corolla Wagon L4-107.5 1762cc 1.8L DOHC (7A-FE) (1993)
2. REMOVE DUST COVER
Using SST and press, press out the dust cover from the inboard joint tulip.
SST 09950-00020
3. REMOVE INBOARD JOINT BOOT CLAMPS
(a) Using a boot clamp tool, draw hooks together and remove the large clamp.
(b) Using side cutter, cut the small boot clamp and remove it.
4. REMOVE INBOARD JOINT TULIP
(a) Place the matchmarks on the inboard joint tulip, tripod and drive shaft.
NOTICE: Do not punch the, marks.
(b) Remove the inboard joint tulip from the drive shaft.