Cressida L6-2759cc 2.8L DOHC (5M-GE) (1988)
/Page-279005.png)
(f) Using SST to hold the camshaft timing pulley, install the pulley set bolt.
SST - 09278-54012
Torque: 700 kg-cm (51 ft-lb, 69 N-m)
CAUTION: Do not make use of the timing belt tension when tightening the bolt.
(g) Turn the crankshaft clockwise two times and set the No. 1 cylinder to TDC/compression.
(h) Recheck the crankshaft pulley angle on the No.1 timing belt cover after alignment of the camshaft match hole.
10. Check timing belt tension
(a) Turn both the intake and exhaust camshaft pulleys inward at the same time to slacken the timing belt at position A.
Turning torque: 200 kg-cm (14 ft-lb, 20 N-m)
(b) Measure the timing belt tension as shown.
Belt deflection at 2 - 3 kg (4.4 - 6.6 lb, 20 - 29 N-m):