FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
39. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY
HINT: Use the same procedure for both sides.
a. Remove the 2 bolts and the front No. 2 speaker.
b. Disconnect the speaker connector.
40. DISCONNECT PASSENGER AIRBAG CONNECTOR
41. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY
42. REMOVE INSTRUMENT PANEL FINISH PANEL END
43. REMOVE ANTENNA CORD SUB-ASSEMBLY
a. Disengage the 4 clamps.
b. Remove the 3 pieces of tape and the antenna cord.
INSTALLATION
CAUTION: Some of these service operations affect the SRS airbag system. Refer to Restraint Systems; Service Precautions before servicing.