FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
1. INSTALL ANTENNA CORD SUB-ASSEMBLY
a. Install the antenna cord with 3 new pieces of tape.
b. Engage the 4 clamps.
2. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY
3. CONNECT PASSENGER AIRBAG CONNECTOR
4. INSTALL INSTRUMENT PANEL FINISH PANEL END
5. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY
HINT: Use the same procedure for both sides.
a. Connect the speaker connector.
b. Insert the 2 hooks into the instrument panel and install the front No. 2 speaker with the 2 bolts.
Torque: 2.5 N.m (25 kgf.cm, 22 in.lbf)
6. INSTALL INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY RH
7. INSTALL INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY LH
8. INSTALL INSTRUMENT PANEL REGISTER ASSEMBLY RH
9. INSTALL INSTRUMENT PANEL LOWER FINISH PANEL SUB-ASSEMBLY RH
10. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
11. INSTALL COMBINATION METER ASSEMBLY
12. INSTALL INSTRUMENT CLUSTER LOWER FINISH PANEL
13. INSTALL INSTRUMENT LOWER PANEL