Toyota Workshop Service and Repair Manuals

Crankshaft: Specifications

Crankshaft

Crankshaft thrust clearance

Standard  ........................................................................................................................................................  0.04 to 0.24 mm (0.0016 to 0.0094 in.)
Maximum  ..................................................................................................................................................................................  0.30 mm (0.0118 in.)

Crankshaft Circle runout

Maximum  ..................................................................................................................................................................................  0.06 mm (0.0024 in.)

Main journal Diameter  ................................................................................................................................  71.988 to 72.000 mm (2.8342 to 2.8346 in.)
Crank pin Taper and out-of-round

Maximum  ..................................................................................................................................................................................  0.02 mm (0.0008 in.)

Crankshaft

Oil clearance

Standard  ..............................................................................................................................................  0.018 to 0.030 mm (0.0007 to 0.0012 in.)
Maximum  ..........................................................................................................................................................................  0.046 mm (0.0018 in.)

Thrust clearance  ............................................................................................................................................  0.04 to 0.24 mm (0.0016 to 0.0094 in.)
Maximum  ..................................................................................................................................................................................  0.30 mm (0.0018 in.)

Straight pin Protrusion

Pin A Standard  ..................................................................................................................................................  22.5 to 23.5 mm (0.886 to 0.925 in.)
Pin B Standard  ..................................................................................................................................................  10.5 to 11.5 mm (0.413 to 0.453 in.)
Pin C Standard  ......................................................................................................................................................  8.5 to 9.5 mm (0.335 to 0.374 in.)
Pin D Standard  ......................................................................................................................................................  5.5 to 6.5 mm (0.217 to 0.256 in.)