FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
Using several steps, tighten the 8 main bearing cap bolts uniformly in the sequence shown in the illustration.
Torque .................................................................................................................................................................... 25 N*m (255 kgf*cm, 18 ft.*lbf.)
Main journal Diameter ................................................................................................................................ 71.988 to 72.000 mm (2.8342 to 2.8346 in.)
Main journal Taper and out-of-round
Maximum .................................................................................................................................................................................. 0.02 mm (0.0008 in.)
Crankshaft bearing cap set bolt Diameter
Standard ............................................................................................................................................................ 10.0 to 10.2 mm (0.393 to 0.402 in.)