FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
(b) Coat a new O-ring with power steering fluid and install it onto the side plate.
(c)
Align the dent of the side plate with that of the vane pump housing front and install the side plate.
NOTICE: Make sure that the side plate is installed facing the correct direction.
4. INSTALL VANE PUMP CAM RING
(a)
Align the dent of the cam ring with that of the side plate and install the cam ring with the inscribed mark facing outward.
5. INSTALL VANE PUMP ROTOR
(a)
Install the vane pump rotor with the inscribed mark facing outward.
(b) Coat the 10 vane plates with power steering fluid.
(c)
Install the vane plates with the round ends facing outward.