FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
14. REMOVE FRONT WIPER MOTOR
a. Using a screwdriver with its tip wrapped in protective tape, disengage the meshing of the rod at the crank arm pivot of the front wiper motor.
b. Using a screwdriver with its tip wrapped in protective tape, disengage the meshing of the rod at the crank arm pivot of the front wiper motor.
c. Using "Torx" socket wrench T30, remove the 2 bolts and the front wiper motor.
INSTALLATION
1. INSTALL FRONT WIPER MOTOR
a. Install the front wiper motor.
b. Using "Torx" socket wrench T30, tighten the 2 bolts.
Torque: 7.5 N.m (76 kgf.cm, 66 in.lbf)