FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
c. Apply DENSO No. 50 grease to the crank arm pivot of the front wiper motor.
d. Install the rod onto the crank arm pivot of the front wiper motor.
e. Apply DENSO No. 50 grease to the crank arm pivot of the front wiper motor.
f.
Install the rod onto the crank arm pivot of the front wiper motor.
2. INSTALL FRONT WIPER MOTOR AND LINK
a. Slide the wiper link as shown in the illustration and engage the rubber pin with the body.
b. Connect the connector.
c. Tighten bolt A.
d. Tighten bolt B.
e. Tighten 3 bolts C.
Torque: 7.0 N.m (71 kgf.cm, 61 in.lbf)