Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
Housing Assembly HVAC: Service and Repair
Blower Unit
Removal and Installation
REMOVAL
1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
2. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER NO.2
3. REMOVE AIR DUCT NO.2
a. Remove the screw.
b. Release the 3 claw fittings and remove the air duct No.2.
4. REMOVE HYBRID VEHICLE CONTROL ECU
5. REMOVE BLOWER ASSEMBLY
a. Disconnect the connector and clamp of the cooling unit motor with fan sub-assembly.
b. Disconnect the connector of the recirculation damper servo.
c. Remove the 2 screws and bracket.
d. Remove the bolt, nut and 2 screws.
e. Disconnect the part fitted to the air conditioner radiator assembly and remove the blower assembly.
INSTALLATION
1. INSTALL BLOWER ASSEMBLY