Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
![background image](/toyota/highlander_2wd/v6-3.3l_(3mz-fe)_hybrid/Page-1253002.png)
a. Aligning the part to be fitted with that of the air conditioning radiator assembly, install the blower assembly.
b. Install the blower assembly with the bolt, nut and 2 screws.
Torque: BOLT . NUT 9.8 N.m (100 kgf.cm, 87 in.lbf)
c. Install the bracket with the 2 screws.
d. Install the connector and clamp.
2. INSTALL HYBRID VEHICLE CONTROL ECU
3. INSTALL AIR DUCT NO.2
4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE COOLER COVER NO.1
a. Release the 2 claw fittings and remove the cooler cover No.1.
2. REMOVE CLEAN AIR FILTER
a. Remove the clean air filter.
3. REMOVE AIR INLET SERVOMOTOR