Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
_hybrid/Page-545009.png)
3. INSTALL ENGINE ROOM RELAY BLOCK ASSEMBLY
a. Install the engine room relay block assembly.
4. REMOVE INVERTER COVER
a. Remove the 2 bolts and inverter cover to the w/ converter inverter assembly.
5. CONNECT NO.3 WIRE FRAME CAUTION: Wear insulating gloves.
NOTE:
-
Make sure that the inverter converter is temporarily installed before working on the converter inverter assembly.
-
Do not allow any foreign objects or waterdrops to enter the w/ converter inverter assembly.