Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
_hybrid/Page-693092.png)
b. Measure the resistance and voltage of the wire harness side connectors.
If the result is not as specified, there may be a malfunction on the wire harness side.
3. CHECK AIR CONDITIONING AMPLIFIER (A/C ECU)
a. Disconnect the A10 and A11 amplifier connectors.
b. Measure the voltage and resistance of the wire harness side connectors.
If the result is not as specified, there may be a malfunction on the wire harness side.
4. CHECK CENTER AIRBAG SENSOR ASSEMBLY
a. Disconnect the A17 sensor connector.