Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
_hybrid/Page-693093.png)
b. Measure the voltage and resistance of the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
5. CHECK COMBINATION METER ASSEMBLY (METER ECU)
a. Disconnect the C11 and C12 meter connectors.
b. Measure the voltage and resistance of the wire harness side connectors.
If the result is not as specified, there may be a malfunction on the wire harness side.
6. CHECK SLIDING ROOF DRIVE GEAR (SLIDING ROOF CONTROL ECU)
a. Disconnect the S20 driver gear connector.