Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
_hybrid/Page-693094.png)
b. Measure the voltage and the resistance of the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
7. CHECK MULTIPLEX NETWORK MASTER SWITCH
a. Disconnect the P5 switch connector.
b. Measure the voltage and resistance of the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
8. CHECK THEFT DETERRENT ECU
a. Disconnect the T4 ECU connector.