INSTALL COUNTER FIFTH GEAR - Toyota Land Cruiser J70 Workshop Manual
- Make
- Toyota
- Model
- Land Cruiser Toyota Land Cruiser J70 Workshop Manual
- Section
- Manual Transmission › INSTALL COUNTER FIFTH GEAR - Toyota Land Cruiser J70 Workshop Manual
INSTALL COUNTER FIFTH GEAR

JANUAL TRANSMISSION — G40 and G52F Transmissions
20. INSTALL COUNTER FIFTH GEAR WITH
HUB

SLEEVE NO.3 ASSEMBLY AND NEEDLE ROLLER
BEARINGS (5-Speed) (a) Apply gear oil to the needle roller bearings. (b) Install the counter 5th gear with hub sleeve No. 3 and needle roller bearings.
21.
INSTALL SYNCHRONIZER RING AND G
EAR

SPLINE PIECE NO.
5 (5-Speed) (a) Install the synchronizer ring on the gear spline piece No. 5. (b) Using SST, drive in the gear spline piece No. 5 with the synchronizer ring slots aligned with the shifting keys, SST 09316-60010
NOTE: When installing the gear spline piece No. 5, sup-, port the counter gear in front with a 3-5 Ib hamm equivalent.

22. INSTALL OIL SEPARATOR (4-Speed)

23.
INSTALL LOCK NUT

(a) Engage the gear double meshing. “a +


(b) Install and torque the lock nut. Torque: 1,200 kg-cm (87 ft-lb, 118 N-m) Stake the lock nut. : (c)


Donated by Onur Azeri . cruisercult.com
Parts & tools for this job For Toyota Land Cruiser
- PARTClutch kitSearch: Toyota Land Cruiser clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Toyota Land Cruiser manual gearbox oil
As an Amazon Associate we earn from qualifying purchases.