toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Air Inlet Servomotor|Page 6144 > < Wheel Fastener|Specifications|Page 6137
Page 1
background image

Air Door Actuator / Motor: Testing and Inspection
Air Inlet Servomotor

INSPECT AIR INLET SERVOMOTOR OPERATION

1. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 2, check that the arm rotates to the "FRESH" side

smoothly.
If operation is not as specified, replace the servomotor.

2. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 3, check that the arm rotates to the "RECIRC" side

smoothly.

Air Inlet Servomotor|Page 6144 > < Wheel Fastener|Specifications|Page 6137