Matrix L4-1.8L (1ZZ-FE) (2008)
(a) Using a screwdriver, remove the seat belt anchor cover.
HINT: Tape the screwdriver tip before use.
(b) Remove the bolt and rear seat 3-point belt.
(c) Using a screwdriver, remove the roof side garnish.
HINT: Tape the screwdriver tip before use.
29. REMOVE ROOF SIDE GARNISH INNER RH
HINT: Use the same procedures described for the LH side.
30. REMOVE FRONT PILLAR GARNISH LH
(a) Using a screwdriver, remove the pillar garnish.
HINT: Tape the screwdriver tip before use.
31. REMOVE FRONT PILLAR GARNISH RH
HINT: Use the same procedures described for the LH side.
32. REMOVE VISOR ASSEMBLY LH
(a) Remove the 2 screws and visor.
33. REMOVE VISOR ASSEMBLY RH
(a) Remove the 2 screws and visor.
34. REMOVE MAP LIGHT ASSEMBLY