Matrix L4-1.8L (1ZZ-FE) (2008)
/Page-1451009.png)
(a) Remove the screw.
(b) Using a screwdriver, disengage the 4 clips and remove the light lens and cover.
HINT: Tape the screwdriver tip before use.
(c) Remove the screw.
(d) Using a screwdriver, remove the map light.
HINT: Tape the screwdriver tip before use.
35. REMOVE NO. 1 INTERIOR LIGHT ASSEMBLY
(a) Using a screwdriver, remove the lens cover.
(b) Using a screwdriver, remove the room light, as shown in the illustration.
HINT: Tape the screwdriver tip before use.
36. REMOVE ASSIST GRIP SUB-ASSEMBLY
(a) Using a screwdriver, remove the 2 grip covers.
(b) Remove the 2 screws and assist grip.
HINT: Tape the screwdriver tip before use.
37. REMOVE VISOR HOLDER