Matrix FWD L4-1.8L (2ZR-FE) (2010)
Front Door Window Regulator: Service and Repair
Installation
WINDOW / GLASS: POWER WINDOW REGULATOR MOTOR (for Front Door): INSTALLATION
HINT
*
Use the same procedure for the RH side and LH side.
*
The procedure listed below is for the LH side.
1. INSTALL FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY
NOTICE:
The regulator arm must be below the intermediate position when installing the front power window regulator motor assembly.
(a) Using a "TORX" driver (T25), install the front power window regulator motor assembly with the 3 screws.
Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)
HINT
A new front window regulator uses self-tapping screws to thread new installation holes when the self-tapping screws are inserted.
2. INSTALL FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY See: Service and Repair/Reassembly
3. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY See: Service and Repair/Reassembly
4. INSTALL FRONT DOOR SERVICE HOLE COVER (w/o Power Door Lock) See: Service and Repair/Reassembly
5. INSTALL FRONT DOOR SERVICE HOLE COVER (w/ Power Door Lock) See: Service and Repair/Reassembly
6. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP See: Service and Repair/Reassembly
7. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH (w/o Front No. 2 Speaker) See: Service and Repair/Reassembly
8. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH (w/ Front No. 2 Speaker) See: Service and Repair/Reassembly
9. INSTALL FRONT DOOR INSIDE HANDLE SUB-ASSEMBLY See: Service and Repair/Reassembly
10. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY See: Service and Repair/Reassembly
11. INSTALL FRONT ARMREST UPPER BASE PANEL See: Service and Repair/Reassembly
12. INSTALL FRONT DOOR INSIDE HANDLE BEZEL See: Service and Repair/Reassembly
13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL