Matrix XR 2WD L4-1.8L (1ZZ-FE) (2003)
![background image](/toyota/matrix_xr_2wd/l4-1.8l_(1zz-fe)/Page-1250003.png)
4. Start the engine and push simultaneously both right and left personal light switches for longer than 8 seconds until "C" appears on the display.
5. Drive the vehicle slowly at 5 mph (8 km/h) or less in a circle until the direction is displayed. If there is not enough space to drive in a circle, drive
around the block until the direction is displayed.
After performing the above steps, calibration is complete.
NOTE
^
Do not perform calibration of the compass in a place where the Earth's magnetic field is subject to interference by artificial magnetic fields
(underground parking, under a steel tower, between buildings, roof parking, near a crossing, near a large vehicle, etc.)
^
During calibration, do not operate electric systems (moon roof, power windows, etc.) as they may interfere with the calibration.