Matrix XR 2WD L4-1.8L (1ZZ-FE) (2003)
![background image](/toyota/matrix_xr_2wd/l4-1.8l_(1zz-fe)/Page-714002.png)
7. REMOVE AIR BAG SENSOR ASSY CENTER
8. REMOVE FLOOR SHIFT CABLE TRANSMISSION CONTROL SELECT
a. Remove the clip, washer and disconnect the cable end of the select cable from the transaxle.
b. Remove the clip and disconnect the select cable from the bracket.
c. Remove the 2 nuts and disconnect the select cable.
d. Disconnect the select cable from the clamp.
e. Remove the 2 bolts and shift cable grommet retainer.
f.
Remove the clip and disconnect the cable end of the select cable from the shift lever assy.
g. Turn the lock and disconnect the select cable from the shift lever assy.
h. Pull out the select cable from the floor.
9. INSTALL FLOOR SHIFT CABLE TRANSMISSION CONTROL SELECT