MR2 L4-132 2164cc 2.2L DOHC (5S-FE) (1993)
9. REMOVE BEARING
Using SST and press, remove the bearing.
SST 09950 - 00020
10. REMOVE BEARING OUTER RACES
Using a brass bar and hammer, tap out both bearing outer races.
INSPECTION OF COUNTER SHAFT COMPONENTS
1. MEASURE PLANETARY SUN GEAR BUSHING INSIDE DIAMETER
Using a caliper gauge, measure the bushing inside diameter of the planetary sun gear as shown.
Standard inside diameter: 29.800 - 29.825 mm (1.1732 - 1.1742 in.)
Maximum inside diameter: 29.870 mm (1.1760 in.)