MR2 L4-132 2164cc 2.2L DOHC (5S-FE) (1993)
2. MEASURE PLANETARY PINION GEAR THRUST CLEARANCE
Using a feeler gauge, measure the planetary pinion gear thrust clearance.
Standard clearance: 0.2 - 0.5 mm (0.008 - 0.020 in.)
Maximum clearance: 0.5 mm (0.020 in.)
If the clearance is greater than the maximum, replace the planetary gear assembly.
ASSEMBLY OF COUNTER SHAFT
1. INSTALL BEARING TO COUNTER SHAFT
Using SST and press, press in the bearing of the thick inner race side.
SST 09350 - 32014 (09351 -32180)
2. INSTALL RING GEAR
a. Install the ring gear to the counter shaft.
b. Install the snap ring.
3. INSTALL BEARING OUTER RACES TO DRIVE PINION
a. Using SST and press, press in the thick race to the flange side of the drive pinion.
SST 09350 - 32014 (09351 - 32090, 09351 - 32180)