MR2 Spyder L4-1.8L (1ZZ-FE) (2001)
/Page-1170005.png)
b. Check the DTC.
HINT: If a malfunction occurs in the speed sensor or actuator, etc. during cruise control driving, the ECM actuates AUTO CANCEL of the
cruise control and turns on and off the CRUISE main indicator light to inform the driver of a malfunction. At the same time, the malfunction is
stored in the memory as a diagnostic trouble code.
c. Output a DTC using diagnosis check wire.
1. Turn the ignition switch ON.
2. Using SST, connect terminals Tc and CG of the DLC3.
SST 09843-18020
3. Read the DTC on the CRUISE main indicator light.
HINT:
- If a DTC is not output, inspect the diagnosis circuit.
- As an example, the blinking patterns for codes; normal and 52 are shown in the illustration.