MR2 Spyder L4-1.8L (1ZZ-FE) (2001)
/Page-238004.png)
b. Remove the steering knuckle.
INSTALLATION
Installation is in the reverse order of removal.
HINT: After installation, check the ABS speed sensor signal and front wheel alignment.
Disassembly and Reassembly
DISASSEMBLY
REMOVE ABS SPEED SENSOR
a. Using a pin punch and hammer, drive out the 2 pins, and remove the 2 attachments from SST.
SST 09520-00031 (09520-00040, 09521-00020)
b. Mount the axle hub assembly in a soft jaw vise.
NOTICE: Replace the axle hub assembly if it is dropped or a strong shock is given to it.