MR2 Spyder L4-1.8L (1ZZ-FE) (2001)
5. INSTALL DISC AND BRAKE CALIPER
Install the disc and brake caliper with the 2 bolts.
Torque: 109 Nm (1,112 kgf-cm, 80 ft. lbs.)
6. INSTALL STABILIZER BAR LINK
a. Install the stabilizer bar link, 3 retainers and 2 cushions to the lower suspension arm with the nut.
Torque: 18 Nm (184 kgf-cm, 13 ft. lbs.)
b. Connect the stabilizer bar link to the stabilizer bar with the nut.
Torque: 44 Nm (449 kgf-cm, 32 ft. lbs.)
HINT: If the ball joint turns together with the nut, use a 5 mm hexagon wrench to hold the stud.
7. INSTALL FRONT WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 inch lbs.)