Paseo L4-1497cc 1.5L DOHC (5E-FE) (1992)
/Page-227009.png)
(a) Install the VSV assembly and ground strap with the bolt.
(b) Connect the vacuum hoses as shown.
(c) Connect the VSV connector(s).
19. With Cruise Control System: INSTALL CRUISE CONTROL ACTUATOR
(a) Install the actuator with the 3 bolts.
(b) Connect the actuator connector.
(c) Install the actuator cover.
20. INSTALL GENERATOR DRIVE BELT
Temporarily install the drive belt with the pivot nut and adjusting bolt.
21. With A/C and/or PS: INSTALL DRIVE BELT
22. ADJUST DRIVE BELTS
A. Adjust generator drive belt
(a) Loosen the pivot nut and adjusting bolt.
(b) Tighten the adjusting bolt. pushing down the generator from lower side of the vehicle with the generator bracket as fulcrum.