Pickup 4WD L4-2366cc 2.4L SOHC (22R) (1984)
/Page-175005.png)
Tensioner minimum: 11.0 mm (0.433 in.)
If the tensioner is worn or less than minimum, replace the chain tensioner.
3. MEASURE CHAIN DAMPERS
(a) Using a micrometer, measure each damper.
Damper wear limit: 0.5 mm (0.020 in.)
If either damper is worn or less than minimum, replace the damper.
INSTALLATION OF TIMING CHAIN
1. INSTALL CRANKSHAFT SPROCKET AND CHAIN
(a) Turn the crankshaft until the shaft key is on top.
(b) Slide the sprocket over the key on the crankshaft.
(c) Place the timing chain on the sprocket with the single bright link aligned with the timing mark on the sprocket.
2. PLACE CHAIN ON CAMSHAFT SPROCKET
(a) Place the timing chain on the sprocket so that the space between the bright chain links is aligned with the timing mark.
(b) Make sure the chain is positioned dampers.
(c) Turn the camshaft sprocket counterclockwise to take the slack out of the chain.
