Pickup 4WD L4-2366cc 2.4L SOHC (22R) (1984)
/Page-626007.png)
1. Install free wheeling hub body.
a. Place the gasket in position on the front axle hub.
.b Install the free wheeling hub body with six cone washers and nuts. Tighten the nuts.
Torque: 315 kg-cm (23 ft-lb, 31 Nm).
2. Install snap ring
a. Install a bolt in the axle shaft and pull it out.
b. Using snap ring pliers, install the snap ring.
c. Remove the bolt.
