toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

G52 Transmission|Page 1477 > < G52 Transmission|Page 1474
Page 1
background image

Counter Gear: Service and Repair
G52 Transmission

COUNTER GEAR FRONT BEARING REPLACEMENT 

(a) Using snap ring pliers, remove the snap ring.
(b) Using SST, press out the bearing. 

SST 09950-00020

(c) Replace the side race.

(d) Using a socket wrench, press in the bearing, side race and inner race.

(e) Select a snap ring that will allow minimum axial play and install it on the shaft.

G52 Transmission|Page 1477 > < G52 Transmission|Page 1474