Pickup 4WD L4-2366cc 2.4L SOHC Turbo (22R-TE) (1986)
Shift Cable: Adjustments
SHIFT LINKAGE
1.
Loosen shift linkage nut.
2.
Push manual lever fully forward, then return lever two notches to the Neutral position.
3.
While holding selector slightly toward Reverse range, tighten shift linkage nut.
Fig. 1 Neutral safety switch adjustment
NEUTRAL SAFETY SWITCH
1.
Loosen neutral safety switch bolt, then place selector in Neutral range.
2.
Disconnect electrical connector, then connect a suitable ohmmeter between terminals, Fig. 1.
3.
Adjust switch until no continuity exists between terminals ``N'' and ``B.''
4.
Connect electrical connector.
5.
Torque neutral safety switch bolt to 48 inch lbs.